PUBLICATION
-
PUBLICATION FROM 2001-2010
Open or Close2010
S.Syahrullail, S.Kamitani and K.Nakanishi. "Experimental Evaluation of RBD Palm Olein as Lubricant in Cold Metal Forming". Jurnal Mekanikal, No.31, pp.1-10 (2010)
C.S.N.Azwadi, O.A.Shahrul and S.Syahrullail. "Lattice Boltzmann Simulation of Plume Behavior from an Eccentric Annulus Cylinder". International Journal of Mechanical and Materials Engineering (IJMME), Volume 5, No.2, pp.129-135 (2010)
S.Syahrullail, B.M.Zubil, C.S.N.Azwadi and C.I.Tiong. "The Effect of Stearic Acid as Lubricant in Cold Forward Extrusion Process". International Tribology Congress - ASIATRIB 2010, Perth, Australia (5-9 December 2010)
S.Syahrullail, C.S.N.Azwadi and Y.M.Najib. "The Influences of the Die Half Angle of Taper Die during Cold Extrusion Process". International Conference on Advances in Mechanical Engineering - ICAME 2010, Shah Alam, Malaysia (2-5 December 2010)
C.I.Tiong, A.K.Khairuldean, A.K.M. Rafiq and S.Syahrullail. "The Lubricating Ability of Jatropha Oil using Fourball Tribotester". International Conference on Advances in Mechanical Engineering - ICAME 2010, Shah Alam, Malaysia (2-5 December 2010)
K.S.Gwee, S.Mazlan, S.Syahrullail and J.Y.Wira. "Jatropha Oil Emulsion as Diesel Fuel". International Conference on Sustainable Mobility 2010, Kuala Lumpur, Malaysia (1-3 December 2010)
C.I.Tiong, A.K.Khairuldean and S.Syahrullail. "Performance of Vegetable Oil in Wear Resistance Using Four Ball Tester". The 3rd International Meeting on Advances in Thermofluids - IMAT 2010, Singapore (30 November 2010)
A.K.Khairuldean, C.I.Tiong, B.Supriyo, T.K.Bahrin and S.Syahrullail. "Investigation of Friction Characteristics of Refined, Bleached, and Deodorized Palm Olein Compared With Automatic Transmission Fluid". The 3rd International Meeting on Advances in Thermofluids - IMAT 2010, Singapore (30 November 2010)
A.K.Khairuldean, C.I.Tiong, B.Supriyo, T.K.Bahrin and S.Syahrullail. "Experimental Evaluation of Automatic Transmission Fluid Mixed with Palm Olein". The 3rd International Graduate Conference on Engineering, Science and Humanities - IGCESH 2010, Johor, Malaysia (2-4 November 2010)
C.I.Tiong and S.Syahrullail. "Flow Line Analysis of AA5083 Extruded with Palm Stearin Lubricant". The 3rd International Graduate Conference on Engineering, Science and Humanities - IGCESH 2010, Johor, Malaysia (2-4 November 2010)
S. Kamitani, K. Nakanishi, S. Syahrullail and S. Simotabira. "Lubrication Performance of Palm Olein in Cold Extrusion of Aluminum Alloy Using Tool with Pits Arrays Surface". The 12th International Conference on Aluminium Alloys - ICAA12, Yokohama, Japan (5-9 September 2010)
S. Syahrullail, C.I. Tiong, S. Kamitani and K. Nakanishi. "Evaluation of RBD Palm Stearin as an Extrusion Lubricant of Aluminum Alloy 5083". The 12th International Conference on Aluminium Alloys - ICAA12, Yokohama, Japan (5-9 September 2010)
C.S. Nor Azwadi, M.Y. Mohd Fairus and S. Syahrullail. "Virtual Study of Natural Convection Heat Transfer in an Inclined Square Cavity". Journal of Applied Sciences, Volume 10, Issue 4, pp.331-336 (February 2010)
2009
Che Sidik N.Azwadi and S.Syahrullail. "Lattice Boltzmann Numerical Prediction of Flow Behavior Downstream of Cylinder Blockage at Various Reynolds Numbers". International Journal of Mechanical System Science and Engineering, Volume 1, No.1 (2009)
S.Syahrullail, C.S.N.Azwadi, M.J.M.Ridzuan, W.B.Seah. "The Effect of Lubricant Viscosity in Cold Forward Plane Strain Extrusion Test". European Journal of Scientific Research, Volume 38, No.4, pp.545-555 (December 2009)
S.Syahrullail, S.C.Teh, Y.M.Najib. "Experimental Evaluation of the Effect of Taper Die on Lubricant Performance". The 2nd International Meeting on Advances in Thermo-fluids - IMAT2009, Universitas Indonesia, Indonesia (November 2009)
S.Syahrullail, S.Kamitani, K.Nakanishi. "Investigation of Frictional Constraint Effect of RBD Palm Stearin as Lubricant by Plane Strain Extrusion". European Journal of Scientific Research, Volume 36, No.4, pp.534-542 (October 2009)
S.Syahrullail, M.J.M.Ridzuan, W.B.Seah. "The Effect of Lubricant Viscosity in High Pressure Forming". Proceeding of the 10th Asian International Conference on Fluid Machinery - AICFM, Kuala Lumpur, Malaysia (Oktober 2009)
N. A. C. Sidik, S. Syahrullail. "A Three-dimension Double-population Thermal Lattice BGK Model for Simulation of Natural Convection Heat Transfer in a Cubic Cavity". World Scientific and Engineering Academy and Society - WSEAS Transaction in Mathematics, Volume 8, Issue 9, pp.561-571 (September 2009)
S.Syahrullail, M.J.M.Ridzuan, S.Kamitani, K.Nakanishi. "The Performance of RBD Palm Stearin as Lubricant in Plane Strain Extrusion Process". Proceeding of the World Tribology Congress 2009 - WTC2009, Kyoto, Japan (September 2009)
S.Kamitani, K.Nakanishi, T.Matsushita, S.Syahrullail. "Measurement of Friction Coefficient under Bulk Plastic Deformation in Plane Strain Extrusion Test". Proceeding of the World Tribology Congress 2009 - WTC2009, Kyoto, Japan (September 2009)
S.Syahrullail, C.S.N.Azwadi and W.B.Seah. "Plasticity Analysis of Pure Aluminium Extruded with an RBD Palm Olein Lubricant". Journal of Applied Sciences, Volume 9, Issue 19, pp.3581-3586 (August, 2009)
S.Syahrullail and W.B.Seah. "The Evaluation of Plasticity flow of Pure Aluminum with RBD Palm Olein as Lubricant". Proceeding of the International Conference on Advances in Mechanical Engineering - ICAME2009, Shah Alam, Malaysia (June 2009)
S.Syahrullail, B.M.Zubil, C.S.N.Azwadi and M.J.M.Ridzuan. "The Evaluation of Friction Effect of RBD Palm Stearin as Cold Metal Forming Lubricant". Proceedings of the National Tribology Conference 2009 - NTC2009, University of Malaya, Kuala Lumpur, Malaysia (May 2009)
Che Sidik N.Azwadi and S.Syahrullail. "Lattice Boltzmann Numerical Prediction of Flow Behavior Downstream of Cylinder Blockage at Various Reynolds Numbers". Proceedings of the World Academy of Science, Engineering and Technology, Volume 50, Pulau Pinang, Malaysia (February 2009)
2008
S.Kamitani, K.Nakanishi and S.Syahrullail. "Effect of Pits Arrays Formed on Tool Surface on Plastic Flow Under Bulk Plastic Deformation". 2nd International Conference on Advanced Tribology - ICAT2008, Singapore (December 2008)
S.Syahrullail, S.Kamitani and K.Nakanishi. "Palm Oil As An Alternative Lubricant For Metal Forming Process". The 3rd Brunei International Conference on Engineering and Technology - BICET2008, Bandar Seri Begawan, Brunei Darussalam (November, 2008)
S.Kamitani, K.Nakanishi, S.Syahrullail and Y.Seki. "The Effect of Lubricants on Material Flow Characteristic by Plane Strain Extrusion with Micro-Pits Formed on the Tool Surface". The 9th International Conference on Technology of Plasticity - ICTP2008, Gyeongju, South Korea (September, 2008)
S.Syahrullail, A.B.M. Fadzil and M.K.M. Norkhuzairi. "The Initial Study of the Performance of Palm Fatty Acid Distillate as Lubricant". The 1st International Meeting on Advances in Thermo-Fluids - IMAT2008, Universiti Teknologi Malaysia, Skudai, Johor, Malaysia (August, 2008)
S.Syahrullail, S.Kamitani and K.Nakanishi. "Experimental Evaluation of RBD Palm Olein as Lubricant in Cold Metal Forming of Al-Mg Alloy by Plane Strain Extrusion Test". International Conference on Mechanical & Manufacturing Engineering 2008, Johor Bahru, Malaysia (May, 2008)
S.Shunpei, K.Nakanishi and S.Syahrullail. "Improvement of Surface Roughness of Aluminum Products by the Micro-Grooves on Tool Surface in Cold Extrusion". Journal of Japan Institute of Light Metal, Volume 58, Number 3 (March, 2008)
2007
S.Syahrullail, S.Kamitani and K.Nakanishi. "The Performance of RBD Palm Stearin as Cold Metal Working Lubricant by Plane Strain Extrusion Test". 1st Engineering Conference on Energy and Environment, Sarawak, Malaysia (2007)
S.Syahrullail, S.Kamitani and K.Nakanishi. "Experimental Evaluation of RBD Palm Olein as Lubricant in Cold Metal Forming by Plane Strain Extrusion". Malaysia - Japan International Symposium On Advanced Technology 2007, Kuala Lumpur, Malaysia (2007)
S.Kamitani, K.Nakanishi and S.Syahrullail. "Measurement of Sliding Friction in Plane Strain Extrusion". Mechanical Engineering Congress, Osaka, Japan (2007)
S.Kamitani, K.Nakanishi and S.Syahrullail. "Improvement of Surface Roughness of a Product by the Micro-grooves Formed on Tool Surface". The 112th Conference of Japan Institute of Light Metals, Toyama, Japan (2007)
S.Kamitani, K.Nakanishi, Y.Fukumoto, S.Syahrullail and T.Hibarino. "The Effect of Groove Array Formed on the Tool Surface on Surface Condition of an Extrusion Product". Japan Mechanical Conference of Kyushu Branch, Fukuoka, Japan (2007)
2006
S.Kamitani, K.Nakanishi, Y.Fukumoto, S.Syahrullail and Y.Ohsako. "Investigation of the Effect of Groove Array Formed on Tool Surface Quality of a Product by Plane Strain Extrusion Test". Mechanical Engineering Congress, Kumamoto, Japan (2006)
S.Kamitani, K.Nakanishi and S.Syahrullail. "The Effect of Micro-grooves Formed on Tool Surface on Friction Behavior under Bulk Plastic Deformation". Proceedings of The Third Asia International Conference on Tribology, Kanazawa, Japan (2006)
S.Kamitani, K.Nakanishi, S.Syahrullail and Y.Seki. "Evaluation of Lubricant Characteristic of Palm Oil by Plane Strain Extrusion Test with Micro-pits on the Plane Plate Tool Surface". The 57th Japanese Joint Conference for the Technology of Plasticity, Tokyo, Japan (2006)
S.Syahrullail, S.Kamitani and K.Nakanishi. "Evaluation of RBD Palm Olein as Lubricant on Al and Al-Mg Alloys by Plane Strain Extrusion Test". Kagoshima University Research Report, No.48 (2006)
2005 S.Kamitani, K.Nakanishi and S.Syahrullail. "The Effect of Pit Size on the Plane Plate Tool Surface on Metal Flow by Plane Strain Extrusion". The Proceedings of the 56th Japanese Joint Conference for the Technology of Plasticity, Okinawa, Japan (2005) S.Kamitani, K.Nakanishi and S.Syahrullail. "The Effect of Micro-pits Formed on the Tool Surface on Metal Flow under Bulk Plastic Deformation".International Tribology Conference, Kobe, Japan (2005) S.Syahrullail, S.Kamitani and K.Nakanishi. "An Experimental Investigation of Tribological Performance of Palm Oil for Cold Metal Forming by Plane Strain Extrusion Test". Kagoshima University Research Report, No.47 (2005) S. Syahrullail, K.Nakanishi and S.Kamitani. "Investigation of the Effects of Frictional Constraint with Application of Palm Olein Oil Lubricant and Paraffin Mineral Oil Lubricant on Plastic Deformation by Plane Strain Extrusion". Journal of Japanese Society of Tribologist, Volume 50, No.12 (2005)
2001
S.Kamitani, K.Nakanishi and S.Syahrullail. "The Effect of Tool Surface Structure on the Metal Flow and Surface Roughness of Workpiece in Bulk Forming". The Proceedings of the 52th Japanese Joint Conference for the Technology of Plasticity, Fukui, Japan (2001)
-
BOOK
Open or CloseChapter in Book
Title: Tribology - Lubricants and Lubrication
ISBN: 978-953-307-371-2
Date: September 2011
Chapter 6: Experimental Evaluation on Lubricity of RBD Palm Olein using Fourball Tribotester.
Authors: Tiong Chiong Ing, Mohammed Rafiq Abdul Kadir, Nor Azwadi Che Sidik, S.Syahrullail.
Title: Heat Transfer - Mathematical Modelling, Numerical Methods and Information Technology
ISBN: 978-953-307-550-1
Date: February 2011
Chapter 6: Lattice Boltzmann Numerical Approach to Predict Macroscale Thermal Fluid Flow Problem.
Authors: C.S.N.Azwadi and S.Syahrullail.
Title:Advances in Mechanical Engineering Part II 2008 ISBN: 978-983-52-0552-1 Date: December 2008 Chapter 6: The Evaluation of Palm Oil as Lubricant at Low Temperature. Authors: S.Syahrullail, S.Kamitani and K.Nakanishi.
Title: Advances in Thermo-fluids ISBN: 978-983-52-0541-5 Date: December 2008 Chapter 6: Experimental Study of Palm Oil as Lubricant in Aluminum Alloy Forming Process. Authors: S.Syahrullail, S.Kamitani and K.Nakanishi.
Research Monograph
Title: The Study of Palm Fatty Acid Distillate as Cold Metal Forming Lubricant. ISBN: 978-967-35-3824-9 Date: December 2008 Authors: S.Syahrullail
PUBLICATION FROM 2011 - PRESENT
2020
Hassan Jabal, M., Saad Abd, H., Gaddoa, A.A., Falih Kadhim, I., Samion, S., Shajar, A.S., Hardan, A.A. (2020). Palm Olein with Jatropha Curcas Oil Blend as a Renewable Bio-Fluid. IOP Conference Series: Materials Science and Engineering, 765 (1).
2019
Aiman, Y., Syahrullail, S., Azhar, S.M., Ummikalsom, A., Mohd Kameil, A.H. (2019). Tribological effect of palm sterin and engine oil (CMEO) on pure aluminium pin steel disc with varies speed and constant load. Jurnal Teknologi, 81 (6), pp. 123-131.
Ridzuan, M.J.M., Abdul Majid, M.S., Khasri, A., Gan, E.H.D., Razlan, Z.M., Syahrullail, S. (2019). Effect of pineapple leaf (PALF), napier, and hemp fibres as filler on the scratch resistance of epoxy composites. Journal of Materials Research and Technology, 8 (6), pp. 5384-5395.
Azman, N.F., Samion, S., Moen, M.A.A., Abdul Hamid, M.K., Musa, M.N. (2019). The anti-wear and extreme pressure performance of CuO and graphite nanoparticles as an additive in palm oil. International Journal of Structural Integrity, 10 (5), pp. 714-725.
Dandan, M.A., Samion, S., Azman, N.F., Mohd Zawawi, F., Abdul Hamid, M.K., Musa, M.N. (2019). Performance of polymeric viscosity improver as bio-lubricant additives. International Journal of Structural Integrity, 10 (5), pp. 634-643.
Salleh, Z.A.M., Samion, S., Ngadi, N., Ruslan, N.N., Rahim, E.A. (2019). The tribological performance of modified RBD palm kernel oil under extreme pressure load test. Jurnal Tribologi, 22, pp. 32-39.
Rasih, R.A., Sidik, N.A.C., Samion, S. (2019). Recent progress on concentrating direct absorption solar collector using nanofluids: A review. Journal of Thermal Analysis and Calorimetry, 137 (3), pp. 903-922.
Afifah, A.N., Syahrullail, S., Wan Azlee, N.I., Che Sidik, N.A., Yahya, W.J., Abd Rahim, E. (2019). Biolubricant production from palm stearin through enzymatic transesterification method. Biochemical Engineering Journal, 148, pp. 178-184.
Opia, A.C., Abdul Hamid, M.K.B., Samion, S. (2019). Anti-oxidant property of eichhornia crassipes in oil samples. International Journal of Engineering and Advanced Technology, 8 (6), pp. 2404-2410.
Bongfa, B., Hamid, M.K.A., Samion, S., Samin, P.M., Bakar, A.R.A. (2019). Friction and wear study of passenger car piston top ring sliding on cast iron material lubricated with palm fatty acid distillate (PFAD). Jurnal Tribologi, 21, pp. 123-135.
Dandan, M.A., Samion, S., Musa, M.N., Zawawi, F.M. (2019). Evaluation of lift and drag force of outward dimple cylinder using wind tunnel. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 57 (1), pp. 48-56.
Nassir, S.A.H., Zawawi, F.M., Mazlan, M.Z., Samion, S., Yazid, M.A.W.M., Abidin, U. (2019). Numerical investigation of wake energy induced by cruising passenger vehicles on highway. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 57 (2), pp. 175-185.
Azman, N.F., Samion, S. (2019). Dispersion Stability and Lubrication Mechanism of Nanolubricants: A Review. International Journal of Precision Engineering and Manufacturing - Green Technology, 6 (2), pp. 393-414.
Hassim, M.H., Idris, M.H., Yajid, M.A.M., Samion, S. (2019). Mechanical and wear behaviour of nanostructure TiO2-Ag coating on cobalt chromium alloys by air plasma spray and high velocity oxy-fuel. Journal of Materials Research and Technology, 8 (2), pp. 2290-2299.
Dandan, M.A., Samion, S. (2019). Tribological analysis of palm kernel methyl ester containing polymeric viscosity improver. Green Materials, 7 (4), pp. 168-176.
Zulhanafi, P., Syahrullail, S. (2019). The tribological performances of Super Olein as fluid lubricant using four-ball tribotester. Tribology International, 130, pp. 85-93.
Rasih, R.A., Sidik, N.A.C., Samion, S. (2019). Numerical Investigation of Direct Absorption Solar Collector using Nanofluids: A Review. IOP Conference Series: Materials Science and Engineering, 469 (1).
Salleh, Z.A.M., Samion, S., Dandan, M.A. (2019). Custom cylinder liner-piston ring combination on pin-on-disc for lubricant characteristic study. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 61 (2), pp. 212-219.
Dandan, M.A., Yahaya, A., Syahrullail, S. (2019). The effect of the different percentage of pour point depressant (PPD) on the tribological properties of palm kernel oil. Tribology in Industry, 41 (3), pp. 365-374.
Dandan, M.A., Samion, S., Yahaya, W.M.A.W., Hadi, F. (2019). Tribological analysis of modified RBD palm kernel containing anti-oxidant additive using four-ball tribotester. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 56 (2), pp. 157-164.
Dandan, M.A., Samion, S., Musa, M.N., Zawawi, F.M. (2019). Evaluation of lift and drag force of outward dimple cylinder using wind tunnel. CFD Letters, 11 (3), pp. 145-153.
Dandan, M.A., Musa, M.N., Samion, S., Yahaya, W.M.A.W., Issham, M.A., Zawawi, F.M. (2019). Evaluation of kapok fiber and gypsum mixture to improve fire resistance. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 56 (2), pp. 276-286.
2018
Dandan, M.A., Aiman Wan Yahaya, W.M., Samion, S., Musa, M.N. (2018). A comprehensive review on palm oil and the challenges using vegetable oil as lubricant base-stock. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 52 (2), pp. 182-197.
Dandan, M.A., Yahaya, W.M.A.W., Samion, S. (2018). The effect of fluidity of palm kernel oil with pour point depressant on coefficient of friction using fourball tribotester. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 50 (2), pp. 97-107.
Musa, M.N., Samion, S., Hamid, M.K.A., Yahya, W.M.A.W., Paiman, E. (2018). Study on water hammer effect in turbulent flow through the pipe system. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 50 (2), pp. 122-133.
Hasannuddin, A.K., Yahya, W.J., Sarah, S., Ithnin, A.M., Syahrullail, S., Sidik, N.A.C., Abu Kassim, K.A., Ahmad, Y., Hirofumi, N., Ahmad, M.A., Sugeng, D.A., Zuber, M.A., Ramlan, N.A. (2018). Nano-additives incorporated water in diesel emulsion fuel: Fuel properties, performance and emission characteristics assessment. Energy Conversion and Management, 169, pp. 291-314.
Amiril, S.A.S., Rahim, E.A., Embong, Z., Syahrullail, S. (2018). Tribological investigations on the application of oil-miscible ionic liquids additives in modified Jatropha-based metalworking fluid. Tribology International, 120, pp. 520-534.
Aiman, Y., Syahrullail, S. (2018). The effect of low temperature test on lubrication performance of palm kernel oil with addition of PPD as A lubricant (ASTM D4172). Journal of Mechanical Engineering, 5 (Specialissue2), pp. 142-156.
Farhanah, A.N., Syahrullail, S. (2018). Tribological behavior of the refined, bleached, and deodorized palm kernel as an alternative lubricant. Scientia Iranica, 25 (3B), pp. 1169-1178.
Azman, N.F., Samion, S., Sot, M.N.H.M. (2018). Investigation of tribological properties of CuO/palm oil nanolubricant using pin-on-disc tribotester. Green Materials, 6 (1), pp. 30-37.
Sapawe, N., Samion, S., Razak Daud, M., Farhan Hanafi, M. (2018). Facile approaches to designing pits on acetabular cups using copper electrodes in die sinking electrical discharge machining. Materials Today: Proceedings, 5 (10), pp. 22154-22161.
Hasannuddin, A.K., Yahya, W.J., Sarah, S., Ithnin, A.M., Syahrullail, S., Sugeng, D.A., Razak, I.F.A., Abd Fatah, A.Y., Aqma, W.S., Rahman, A.H.A., Ramlan, N.A. (2018). Performance, emissions and carbon deposit characteristics of diesel engine operating on emulsion fuel. Energy, 142, pp. 496-506.
2017
Abdul Sani, A.S., Rahim, E.A., Samion, S. (2017). Tribological performance of modified jatropha oil containing oil-miscible ionic liquid for machining applications. Journal of Mechanical Science and Technology, 31 (12), pp. 5675-5685.
Amiril, S.A.S., Rahim, E.A., Syahrullail, S. (2017). A review on ionic liquids as sustainable lubricants in manufacturing and engineering: Recent research, performance, and applications. Journal of Cleaner Production, 168, pp. 1571-1589.
Rahim, E.A., Amiril, S.A.S., Mohid, Z., Syahrullail, S., Kamdani, K. (2017). Evaluation of machining performance of palm olein based tmp esters containing additives as bio-based metalworking fluids. Proceedings of the 9th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2017.
Nurul, M.A., Syahrullail, S. (2017). A new approach to cold extrusion process: Dimples indentation on sliding contact surface and palm oil as an alternative lubricant. Scientia Iranica, 24 (6), pp. 2875-2886.
Farhanah, A.N., Syahrullail, S., Ajruddin, M.A. (2017). Evaluation of RBD palm stearin as alternative lubricant for cold forward extrusion process. Journal of Physics: Conference Series, 908 (1).
Zuan, A.M.S., Syahrullail, S., Ngadi, N., Ruslan, N.N. (2017). Bio-based lubricants from modification of RBD palm kernel oil by trans-esterification. Journal of Mechanical Engineering, SI 4 (2), pp. 199-211.
Razak, D.M., Syahrullail, S., Nuraliza, N., Azli, Y., Sapawe, S. (2017). Surface modification of biomaterial embedded with pits using die sinker machine. Scientia Iranica, 24 (4), pp. 1901-1911.
Sani, A.S.A., Rahim, E.A., Talib, N., Kamdani, K., Rahim, M.Z., Samion, S. (2017). Performance evaluation of palm-olein TMP ester containing hexagonal boron nitride and an oil miscible ionic liquid as bio-based metalworking fluids. Journal of Mechanical Engineering, SI 4 (1), pp. 223-234.
Kiu, S.S.K., Yusup, S., Chok, V.S., Taufiq, A., Kamil, R.N.M., Syahrullail, S., Chin, B.L.F. (2017). Comparison on tribological properties of vegetable oil upon addition of carbon based nanoparticles. IOP Conference Series: Materials Science and Engineering, 206 (1).
Zuan, A.M.S., Syahrullail, S., Zaminain, M.D. (2017). Tribological properties of mineral oil mix with RBD palm stearin using four-ball tribotester at various loads. Advanced Science Letters, 23 (5), pp. 4725-4727.
Sapawe, N., Samion, S., Ibrahim, M.I., Daud, M.R., Yahya, A., Hanafi, M.F. (2017). Tribological Testing of Hemispherical Titanium Pin Lubricated by Novel Palm Oil: Evaluating Anti-Wear and Anti-Friction Properties. Chinese Journal of Mechanical Engineering (English Edition), 30 (3), pp. 644-651.
Nurul, M.A., Syahrullail, S. (2017). Surface Texturing and Alternative Lubricant: Tribological Study of Tapered Die Sliding Contact Surface in Cold Extrusion Process. Tribology Transactions, 60 (1), pp. 176-186.
Azman, N.F., Samion, S. (2017). Improvement of the lubrication performance of RBD palm stearin as an alternative lubricant under different sliding speeds. Journal of Mechanical Engineering, 63 (1), pp. 15-24.
Zulhanafi, P., Syahrullail, S., Faridzuan, M.M. (2017). Tribological performance of palm kernel oil added with nanoparticle copper oxide using fourball tribotester. Jurnal Teknologi, 79 (7-4), pp. 53-59.
Aiman, Y., Syahrullail, S., Yahya, W.J. (2017). Tribological performance of palm kernel oil with addition of pour point depressants as a lubricant using four-ball tribotester under variable load test. Jurnal Teknologi, 79 (7-3), pp. 43-52.
Sidik, N.A.C., Yazid, M.N.A.W.M., Samion, S. (2017). A review on the use of carbon nanotubes nanofluid for energy harvesting system. International Journal of Heat and Mass Transfer, 111, pp. 782-794.
Afifah, A.N., Syahrullail, S., Amirrul Amin, M., Faizal, H.M. (2017). Mechanical properties of palm kernel oil-copper oxide nanolubricant. Jurnal Teknologi, 79 (7-4), pp. 61-66.
Zuan, A.M.S., Syahrullail, S., Arif, M.D., Kamitani, S. (2017). Tribological performance of palm kernel oil at various load using pin-on-disk tribotester. Journal of Mechanical Engineering, (Special Issue 1), pp. 91-102.
Azman, N.F., Samion, S., Rahim, E.A., Shunpei, K. (2017). The influence of Zinc-Dialkyl-Dithiophosphate (ZDDP) additives on the tribological performance of RBD palm kernel. Journal of Mechanical Engineering, (Special Issue 1), pp. 65-77.
Sidik, N.A.C., Samion, S., Ghaderian, J., Yazid, M.N.A.W.M. (2017). Recent progress on the application of nanofluids in minimum quantity lubrication machining: A review. International Journal of Heat and Mass Transfer, 108, pp. 79-89.
Zuan, A.M.S., Syahrullail, S., Yahya, W.J., Shafiq, M.N., Fawwaz, Y.M. (2017). Tribological properties of potential bio-based lubricants from rbd palm stearin and palm fatty acid distillate. Jurnal Teknologi, 79 (7-3), pp. 21-26.
Rahim, E.A., Talib, N., Amiril Sahab, A.S., Syahrullail, S., Mohid, Z. (2017). Tribological evaluation on various formulation of modified rbd palm olein as sustainable metalworking fluids for machining process. Materials Science Forum, 882, pp. 13-17.
Kiu, S.S.K., Yusup, S., Soon, C.V., Arpin, T., Samion, S., Kamil, R.N.M. (2017). Tribological investigation of graphene as lubricant additive in vegetable oil. Journal of Physical Science, 28, pp. 257-267.
Ghaderian, J., Sidik, N.A.C., Kasaeian, A., Ghaderian, S., Okhovat, A., Pakzadeh, A., Samion, S., Yahya, W.J. (2017). Performance of copper oxide/distilled water nanofluid in evacuated tube solar collector (ETSC) water heater with internal coil under thermosyphon system circulations. Applied Thermal Engineering, 121, pp. 520-536.
2016
Nurul, M. A., Syahrullail, S. & Teng, H. W., 2016. Alternative lubricants: Study on palm oil-based lubricants in metal forming process, 2016. Journal of Oil Palm Research, 28, 1, pp. 93-103. (IF=0.544, Q4)
Razak, D. M., Samion, S., Noorawzi, N. & Azli, Y., 2016. A New Tribological Approach for Lubricated Sliding Contact of Pitted Metallic Curvature Cup. Tribology Transactions, 59, 5, pp. 876-882. (IF=1.418, Q2)
Faizal, H. M., Nazri, M. S. M., Rahman, M. M., Syahrullail, S., 2016. Development of palm biomass briquettes with polyethylene plastic waste addition. Jurnal Teknologi, 78, 9-2, pp. 69-75. (SCOPUS)
Sapawe, N., Samion, S., Zulhanafi, P., Nor Azwadi, C. S. & Hanafi, M. F., 2016. Effect of Addition of Tertiary-Butyl Hydroquinone into Palm Oil to Reduce Wear and Friction Using Four-Ball Tribotester. Tribology Transactions, 59, 5, pp. 883-888. (IF=1.418, Q2)
Azman, N. F., Samion, S. and Rahim, E. A., 2016. Formulation of refined, bleached and deodorised palm stearin with zinc dialkyl-dithiophosphate additive and its tribological performance. Jurnal Teknologi, 78, 9-2, pp. 53-59. (SCOPUS)
Nurul, M. A. & Syahrullail, S., 2016. Influence of micro-pits indentation and palm based-oil on taper die sliding contact surface in cold extrusion process. International Journal of Precision Engineering and Manufacturing, 17, 7, pp. 917-930. (IF=1.075, Q3)
Nuraliza, N., Syahrullail, S., Razak, D. M. and Azwadi, C. S. N., 2016. Influence of micro-pits on sliding motion under low speeds for block-on-disk tribotester. Particulate Science and Technology, 34, 6, pp. 754-763. (IF=0.707, Q3).
Izhan, I. M., Syahrullail, S., Yong, S. Y. and Nurul, M. A., 2016. Investigation of micro-pits formation on billet surfaces in plane strain extrusion. Jurnal Teknologi, 78, 10-2, pp. 39-45.
Sidik, N. A. C., Yazid, M. N. A. W. M., Samion, S., Musa, M. N. and Mamat, R., 2016. Latest development on computational approaches for nanofluid flow modeling: Navier-Stokes based multiphase models. International Communications in Heat and Mass Transfer, 74, pp. 114-124. (IF=2.559, Q1).
Afifah, A.N., Syahrullail, S., Sidik, N.A.C., 2016. Magnetoviscous effect and thermomagnetic convection of magnetic fluid: A review. Renewable & Sustainable Energy Reviews, 55, pp.1030-1040. (IF = 6.798, Q1).
Bongfa, B., Syahrullail, S., Abdul Hamid, M. K. and Samin, P. M., 2016. Suitable additives for vegetable oil-based automotive shock absorber fluids: an overview. Lubrication Science, 28, 6, pp. 381-404. (IF=1.384, Q2).
Nurul, M. A. & Syahrullail, S., 2016. Surface Texturing and Alternative Lubricant: Tribological Study of Tapered Die Sliding Contact Surface in Cold Extrusion Process. Tribology Transactions, 60, 1, 176-186. (IF = 1.418, Q2).
Zuan, A. M. S., Yong, S. Y., Nurul, M. A., Syahrullail, S. & Rahim, E. A., 2016. The effects of the die half angle of taper die on plane strain extrusion. Jurnal Teknologi, 78, 9-2, pp. 45-51. (SCOPUS)
Sidik, N. A. C., Samion, S., Musa, M. N., Muhammad, M. J., Muhammad, A. I., Yazid, M. N. A. W. M. and Mamat, R., 2016. The significant effect of turbulence characteristics on heat transfer enhancement using nanofluids: A comprehensive review. International Communications in Heat and Mass Transfer, 72, pp. 39-47. (IF=2.559, Q1).
Hassan, M., Syahrullail, S. & Ani, F. N., 2016. The tribological characteristics of the cactus and mineral oil blends using four-ball tribotester. Jurnal Teknologi, 78, 9-2, pp. 33-38. (SCOPUS)
Faizal, H. M., Jusoh, M. A. M., Rahman, M. R. A., Syahrullail, S. and Latiff, Z. A., 2016. Torrefaction of palm biomass briquettes at different temperature. Jurnal Teknologi, 78, 9-2, pp. 61-67. (SCOPUS)
Nuraliza, N. and Samion, S. 2016. Tribological Effects of Vegetable Oil as Alternative Lubricant: A Pin-on-Disk Tribometer and Wear Study. Tribology Transactions, 59, 5, pp. 831-837. (IF = 1.418, Q2).
Hassan, M., Ani, F. N. and Syahrullail, S., 2016. Tribological Features of Refined, Deodorized, and Bleached Palm Olein with Mineral Oil Blend. Tribology Transaction, 59, 4, pp. 671-678. (IF=1.418, Q2).
Hassan, M., Ani, F. N. & Syahrullail, S., 2016. Tribological performance of refined, bleached and deodorised palm olein blends bio-lubricants. Journal of Oil Palm Research, 28, 4, pp. 510-519. (IF = 0.544, Q4).
2015
Nuraliza, N., Syahrullail, S., Razak, D.M., 2015. An alternative lubricant: The potential of double fractionated palm olein as a lubricant for enhanced tribological behaviour using a pin-on-disk tribo-tester. Journal of Oil Palm Research, 27, 4, pp.393-402.
Farhanah, A.N., Syahrullail, S., 2015. Tribological performance of raw and formulated RBD palm Kernel with ZDDP additive. Tribology - Materials, Surfaces and Interfaces, 9, 4, pp.191-195.
Nuraliza, N., Syahrullail, S., Musa, M.N., 2015. Evaluation on the tribological properties of double fractionated palm olein at different loads using pin-on-disc machine. Jurnal Teknologi, 75, 11, pp.113-122.
Razak, D.M., Syahrullail, S., Sapawe, N., Azli, Y., Nuraliza, N., 2015. A new approach using palm olein, palm kernel oil, and palm fatty acid distillate as alternative biolubricants: Improving tribology in metal-on-metal contact. Tribology Transactions, 58, 3, pp.511-517.
Farhanah, A.N., Syahrullail, S., Musa, M.N., Bahak, M.Z., 2015. Modification of RBD palm kernel and RBD palm stearin oil with ZDDP additive addition. Jurnal Teknologi, 74, 10, pp.121-126.
Nurul, M.A., Syahrullail, S., Musa, M.N., 2015. Determining alternatives for metal forming lubricants: A study using plane strain cold extrusion process of JIS-A1100 pure aluminum billet. Jurnal Teknologi, 74, 10, pp.35-43.
Afifah, A.N., Syahrullail, S., Nor Azwadi, C.S., 2015. Natural convection of aluminium oxidewater nanofluid. Jurnal Teknologi, 75, 11, pp.161-167.
2014
Kartiko, N., Azli, Y., Nor Liyana, H.S., Syahrullail, S., Razak Daud, M.D., 2014. Development of computer-aided EDM for machining micropits on spherical surface of hip implant. Applied Mechanics and Materials, 554, pp. 541-545.
Syahrullail, S., Zulhanafi, P., 2014. The oxidation effect of palm oil based lubricant using four - Ball tribotester. Applied Mechanics and Materials, 554, pp. 281-285.
Jabal, M.H., Ani, F.N., Syahrullail, S., 2014. The tribological characteristic of the blends of rbd palm olein with mineral oil using four-ball tribotester. Jurnal Teknologi (Sciences and Engineering) 69 (6), pp. 11-14.
Golshokouh, I., Ani, F.N., Syahrullail, S., 2014. Lubricity of palm fatty acid distillates at various rotational speeds. Applied Mechanics and Materials, 606, pp. 9-13.
Golshokouh, I., Syahrullail, S., Ani, F.N., 2014. Influence of normal load and temperature on tribological properties of jatropha oil. Jurnal Teknologi, 71 (2), pp. 145-150.
Syahrullail, S., Razak, D.M., Sapawe, N., Azli, Y., Kartiko, N., 2014. Effect of low current for machining pit using electrical discharge machine. Applied Mechanics and Materials, 554, pp. 180-184.
Syahrullail, S., Azmi, A.M., Sapawe, N., Khalid, A., 2014. Wear characterization of aluminum lubricated with palm olein at different normal load. Applied Mechanics and Materials, 554, pp. 401-405.
Sidik, N.A.C., Mohammed, H.A., Alawi, O.A., Samion, S., 2014. A review on preparation methods and challenges of nanofluids. International Communications in Heat and Mass Transfer, 54, pp. 115-125.
Syahrullail, S., Nurul, M.A., 2014. Evaluation of paraffinic mineral oil as lubricant in cold work extrusion process. Applied Mechanics and Materials, 554, pp. 327-331.
Syahrullail, S., Norhakem, H.M., Sapawe, N., Khalid, A., 2014. The influence of normal load in wear resistance characteristic of palm fatty acid distillate. Applied Mechanics and Materials, 554, pp. 286-290.
Syahrullail, S., Kamitani, S., Nakanishi, K., 2014. The effect of lubricant viscosity in cold work forward extrusion. Applied Mechanics and Materials, 554, pp. 291-295.
Syahrullail, S., Izhan, M.I., Mohammed Rafiq, A.K., 2014. Tribological investigation of RBD palm olein in different sliding speeds using pin-on-disk tribotester. Scientia Iranica, 21 (1), pp. 162-170.
Syahrullail, S., Nuraliza, N., 2014. Friction and wear performance of double fractionate palm olein lubricant using pin-on-disk tribometer. Applied Mechanics and Materials, 554, pp. 396-400.
Nurul, M.A., Syahrullail, S., 2014. Study of alternative lubricants for cold extrusion process of A1100 pure aluminium. Jurnal Teknologi, 71 (2), pp. 139-143.
Alawi, O.A., Sidik, N.A.C., Mohammed, H.A., Syahrullail, S., 2014. Fluid flow and heat transfer characteristics of nanofluids in heat pipes: A review. International Communications in Heat and Mass Transfer, 56, pp. 50-62.
Iman, G., Syahrullail, S., Farid Nasir, A., 2014. Empty fruit bunches oil as new lubricant. Applied Mechanics and Materials, 660, pp. 352-356. Samion, S., Daud, M.R., Yahya, A., (...), Hashim, N.L.S., Nugroho, K., 2014. Machining pits on the curvature surface cup using spark process. Jurnal Teknologi (Sciences and Engineering), 69 (3), pp. 129-132.
Andromeda, T., Yahya, A., Mahmud, N., (...), Samion, S., Baharom, A., 2014. Architecture and training algorithm of feed forward artificial neural network to predict material removal rate of electrical discharge machining process. Scientia Iranica, 21 (6), pp. 2224-2231.
Erawan, M.A., Azli, Y., Nor Hisham, K., (...), Zurkarmawan, A.B., Trias, A., 2014. Power generator of Electrical Discharge Machining (EDM) system. Applied Mechanics and Materials, 554, pp. 638-642.
Golshokouh, I., Syahrullail, S., Ani, F.N., Masjuki, H.H., 2014. Investigation of palm fatty acid distillate oil as an alternative to petrochemical-based lubricants. Journal of Oil Palm Research, 26 (MAR), pp. 25-36.
Syahrullail, S., Nuraliza, N., 2014. Experimental study on the effect of different speed using pin on disc tribotester. Applied Mechanics and Materials, 465-466, pp. 562-565.
Golshokouh, I., Syahrullail, S., Shariatmadari, S., Ani, F.N., 2014. Investigate Jatropha oil as new source of lubricant oil. Applied Mechanics and Materials, 465-466, pp. 201-205.
Syahrullail, S., Kamitani, S., Shakirin, A., 2014. Tribological evaluation of mineral oil and vegetable oil as a lubricant. Jurnal Teknologi (Sciences and Engineering), 66 (3), pp. 37-44.
Hafis, S.M., Ridzuan, M.J.M., Mohamed, A.R., Farahana, R.N., Syahrullail, S., 2014. An experimental investigation of palm pressed fibre waste as lubricant in strip drawing. Source of the DocumentJurnal Teknologi (Sciences and Engineering), 66 (3), pp. 91-98.
2013
Md Razak, D., Syahrullail, S., Azli, Y., Nazriah, M., Nor Liyana, S.H. and Kartiko, N., 2013. Micro-pits on biomaterial in electrical discharge machining by using Taguchi method. The 13th International Conference on Robotics, Control and Manufacturing Technology (ROCOM '13), pp.172-177.
Syahrullail, S., Ani, F.N. and Golshokouh, I., 2013. Wear resistance characteristic of vegetable oil. The 2nd International Conference on Sustainable Materials Engineering (ICoSM 2013), pp.44-47.
Syahrullail, S., Wira, J.Y., Wan Nik, W.B. and Tiong, C.I., 2013. The effect of sliding speed on friction and wear of RBD palm olein. Applied Mechanics and Materials, 315, pp.951-955.
Izhan, M.I., Wira, J.Y., Abdul Kadir, M.R. and Syahrullail, S., 2013. Experimental study on the effect of different speeds applied with palm olein using pin-on-disk tester. Applied Mechanics and Materials, 315, pp.946-950.
Golshokouh, I., Wira, J.Y., Farid, N.A. and Syahrullail, S., 2013. Palm fatty acid distillate as an alternative source for hydraulic oil. Applied Mechanics and Materials, 315, pp.941-945.
Syahrullail, S., Wira, J.Y., Wan Nik, W.B. and Fawwaz, W.N., 2013. Friction characteristic of RBD palm olein using four-ball tribotester. Applied Mechanics and Materials, 315, pp.936-940.
Golshokouh, I., Syahrullail, S., Ani, F.N. and Masjuki, H.H., 2013. Investigation of palm fatty acid distillate as an alternative lubricant of petrochemical based lubricant, tested at various speeds. International Review of Mechanical Engineering (IREME), 7-1, pp.72-80.
Nor Liyana, S.H., Azli, Y., Mohammed Rafiq, A.K., Syahrullail, S. and Nazriah, M., 2013. Simulation of micro-EDM servomotor for machining micro pits oh hip implant. Jurnal Teknologi, 60, pp.45-51.
Syahrullail, S., Azwadi, C.S.N.and Najib, Y.M., 2013. The influences of the die half angle of taper die during cold extrusion process. Arabian Journal for Science and Engineering, 38, pp.1201-1207.
Izhan, M.I., Mohammed Rafiq, A.K. and Syahrullail, S., 2013. Friction resistance of refined, bleached and deodorized (RBD) palm olein using modified pin-on-disk tribotester. Jurnal Teknologi, 60, pp.27-33.
Trias, A., Azli, Y., Syahrullail, S., Ameruddin, B. and Nor Liyana, H., 2013. PID controller tunning by differential evolution algorithm on EDM servo control system. Applied Mechanics and Materials, 284-287, pp.2266-2270.
Hafis, S.M., Ridzuan, M.J.M., Farahana, R.N., Amran Ayob and Syahrullail, S., 2013. Paraffinic mineral oil lubrication for cold forward extrusion: Effect of lubricant quantity and friction. Tribology International, 60, pp.111-115.
2012
Chiong Ing, T., Rafiq, A.K.M., Azli, Y. and Syahrullail, S., 2012. Tribologcal behaviour of refined, bleached and deodorized palm olein in different loads using a four-ball tribotester. Scientia Iranica, 19(6), pp.1487-1492.
Kamitani, S., Nakanishi, K., Matsushita, T. and Syahrullail, S., 2012. Measurement of coefficient of friction under bulk plastic deformation by using plane strain extrusion apparatus with plane plate tool and taper die. Tribology Online, 7(4), pp.249-257.
Syahrullail, S. and Chiong Ing, T., 2012. Friction characteristic of palm olein at different operating temperature using four-ball tribotester. The 5th International Meeting on Advances in Thermofluids - IMAT 2012, Bintan, Indonesia (12-13 Nov 2012).
Norhayati, A., Maizan, S., Zin, H.M., Wira, J.Y., Wan Nik, W.B. and Syahrullail, S., 2012. The influence of lubricant in cold work forward extrusion using micro-pits tool. Jurnal Teknologi, 58, pp.89-93.
Wan Nik, W.B., Syahrullail, S., Roslina, R., Rahman, M.M. and Zulkifli, M.F.R., 2012. Corrosion behaviour of aluminium alloy in palm oil methyl ester (B100). Jurnal Teknologi, 58, pp.73-76.
Tiong, C.I., Azli, Yahya., Mohammed Rafiq, A.K., Syahrullail, S., 2012. Tribological evaluation of refined, bleached and deodorized palm stearin using four-ball tribotester with different normal loads. Journal of Zhejiang University - Science A, 13(8), pp.633-640.
Nor Liyana, S.H., Azli, Y., Trias, A., Mohammed Rafiq, A.K., Nazriah, M. and Syahrullail, S., 2012. Simulation of PSO-PI Controller of DC Motor in Micro-EDM System for Biomedical Application. Procedia Engineering, 41, pp.805-811. (Presented in International Symposium on Robotics and Intelligent Sensors - IRIS 2012).
Tiong, C.I., Mohammed Rafiq, A.K., Azli, Y. and Syahrullail, S., 2012. The Effect of Temperature on the Tribological Behavior of RBD Palm Stearin. Tribology Transactions, 55(5) pp.539-548.
Wira, J.Y., Tan, W.C., Syahrullail, S., Noge, H., Mazlan, S. and Alias, M.Nor., 2012. Utilization of Waste Hydraulic Oil as Fuel in Diesel Engine. Advanced Materials Research, Volumes 518-523, pp.3263-3266.
Syahrullail, S., Kamitani, S. and Nakanishi, K., 2012. Experimental Evaluation of Refined, Bleached, and Deodorized Palm Olein and Palm Stearin in Cold Extrusion of Aluminum A1050. Tribology Transactions, Volume 55, Issue 2, pp.199-209.
Wan Nik, W.B., Ayob, A.F., Syahrullail, S., Masjuki, H.H. and Ahmad, M.F., 2012. The Effect of Boron Friction Modifier on the Performance of Brake Pads. International Journal of Mechanical and Materials Engineering, Volume 7, No. 1, pp.31-35.
Nor Liyana, S.H., Azli, Y., Mohammed Rafiq, A.K., Syahrullail, S. and Nazriah, M., 2012. Manufacturing Methods for Machining Micro Pits of Hip Implant for Metal-on-Metal Lubrication. International Conference on Biomedical Engineering (ICoBE), Penang, Malaysia.
Nazriah, M., Azli, Y., Mohammed Rafiq, A.K., Syahrullail, S. and Nor Liyana, S.H., 2012. Electrical Discharge Machining Pulse Power Generator to Machine Micropits of Hip Implant. International Conference on Biomedical Engineering (ICoBE), Penang, Malaysia.
2011
Wan Nik, W.B, Zulkifli, F., Ahmad, A., Sulaiman, O., Syahrullail, S. "Hydraulic field test rig and evaluating plant oil performance", International Journal of Mechanical and Mechanics Engineering, Volume 11, Issue 5, pp.19-25 (October 2011).
Tiong Chiong Ing, A.K.Mohammed Rafiq and S.Syahrullail. "Friction Characteristic of Jatropha Oil using Fourball Tribotester", Regional Tribology Conference - RTC2011, Langkawi, Kedah, Malaysia (22-24 Nov 2011)
S.Syahrullail, J.Y.Wira, A.H.M.Kameil and W.N.Fawwaz. "Fourball Tribotester Assessment of RBD Palm Olein as an Industrial Lubricant", International Tribology Conference - ITC2011, Hiroshima, Japan (30 Oct - 3 Nov 2011)
Iman golshokouh, Farid Nasir Ani and S.Syahrullail. "Wear Resistance Evaluation of Palm Fatty Acid Distillate Using Four-ball Tribotester", The 4th International Meeting of Advances in Thermofluids - IMAT2011, Melaka, Malaysia, pp.1302-1309 (3-4 Oct 2011)
S.Syahrullail, J.Y.Wira, A.H.M.Kameil and W.N.Fawwaz. "Wear Characteristic of RBD Palm Olein using Four-ball Tribotester", The 4th International Meeting of Advances in Thermofluids - IMAT2011, Melaka, Malaysia, pp.1296-1301 (3-4 Oct 2011)
A.K. Khairuldean, T. Chiong Ing, Mohd Salman Che Kob, Aries Budianto, S. Bambang, T. Kamarul Baharin, S. Ariyono and S.Syahrullail. "Extreme Pressure Properties Investigation of Palm Olein Using Four Ball Tribotester", The 4th International Meeting of Advances in Thermofluids - IMAT2011, Melaka, Malaysia, pp.568-575 (3-4 Oct 2011)
Tiong Chiong Ing, A.K. Mohammed Rafiq, J.Y. Wira and S.Syahrullail. "Experimental Study the Effect of Speeds in Wear Using Fourball Tribotester", The 4th International Meeting of Advances in Thermofluids - IMAT2011, Melaka, Malaysia, pp.552-558 (3-4 Oct 2011)
A.K. Khairuldean, T. Chiong Ing, S. Bambang, T. Kamarul Baharin, J.Y. Wira and S.Syahrullail. "Evaluation of Oleic Acid as Additive in ATF Fluid", The 4th International Meeting of Advances in Thermofluids - IMAT2011, Melaka, Malaysia, pp.505-510 (3-4 Oct 2011)
M. K. Abdul Hamid , G.W. Stachowiak and S. Syahrullail. "Effects of Hard Particles on Friction Coefficients and Particle Embedment in Brake System during Hard Braking", The 4th International Meeting of Advances in Thermofluids - IMAT2011, Melaka, Malaysia, pp.473-481 (3-4 Oct 2011)
S.M.Hafis, M.J.M.Ridzuan, W.N.Imaduddin Helmi and S.Syahrullail. "Effect of Extrusion Ratio on Paraffinic Mineral Oil Lubricant in Cold Forward Extrusion", The 4th International Meeting of Advances in Thermofluids - IMAT2011, Melaka, Malaysia, pp.432-437 (3-4 Oct 2011)
M.J.M.Ridzuan , S.M.Hafis, K.N.Saifullah and S.Syahrullail. "A study of minimum quantity lubricant (MQL) of RBD palm stearin in plane strain extrusion", The 4th International Meeting of Advances in Thermofluids - IMAT2011, Melaka, Malaysia, pp.79-83 (3-4 Oct 2011)
A. Norhayati, J.Y. Wira, H.M. Zin and S.Syahrullail. "A New Method to Maintain Lubricant Layer in Extrusion Process", The 4th International Meeting of Advances in Thermofluids - IMAT2011, Melaka, Malaysia, pp.57-63 (3-4 Oct 2011)
S.M.Hafis, M.J.M.Ridzuan, S.Syahrullail and A.Amran. "The Effect of Paraffinic Mineral Oil Lubrication in Cold Forward Extrusion", International Journal of Integrated Engineering - Issue on Mechanical, Materials and Production Engineering, Volume 3, No.1, pp.28-31 (2011)
Tiong Chiong Ing, Mohammed Rafiq Abdul Kadir, Nor Azwadi Che Sidik and S.Syahrullail. Chapter in book. Chapter 6: Experimental Evaluation on Lubricity of RBD Palm Olein using Fourball Tribotester. Book title: Tribology - Lubricants and Lubrication ISBN: 978-953-307-371-2
S.Syahrullail, B.M.Zubil, C.S.N.Azwadi and M.J.M.Ridzuan. "Experimental Evaluation of Palm Oil as Lubricant in Cold Forward Extrusion". International Journal of Mechanical Sciences, 53, pp.549-555 (July 2011)
Khairuldean A.Kadir, T.Chiong Ing, Bambang Supriyo, Kamarul Bahrin Tawi and S.Syahrullail. "Comparison Between Mineral Oil and Palm Olein in Wear Resistance". ASEAN Conference on Scientific and Social Science Research - ACSSSR, Pulau Pinang, Malaysia (22-23 June 2011)
S.Syahrullail and A.Horhayati. "The Effect of the Diamond Shape Pits on Taper Die in Extrusion Process". ASEAN Conference on Scientific and Social Science Research - ACSSSR, Pulau Pinang, Malaysia (22-23 June 2011)
S.M.Hafis, S.Syahrullail, A.Amran and M.J.M.Ridzuan. "The Effect of Paraffinic Mineral Oil Lubrication in Cold Forward Extrusion". 2nd International Conference on Mechanical & Manufacturing Engineering 2011 - ICME, Putrajaya, Malaysia (6-7 June 2011)
M.J.M.Ridzuan, S.Syahrullail, S.M.Hafis and A.R.Anas. "Experimental Performance Evaluation of RBD Palm Stearin as an Extrusion Lubricant". 2nd International Conference on Mechanical & Manufacturing Engineering 2011 - ICME, Putrajaya, Malaysia (6-7 June 2011)
S.Syahrullail, C.S.N.Azwadi and C.I.Tiong. "The Metal Flow Evaluation of Billet Extruded with RBD Palm Stearin". International Review of Mechanical Engineering (IREME), Volume 5, No.1, pp.21-27 (January 2011)
C.S.N.Azwadi and S.Syahrullail. Chapter in book. Chapter 6: Lattice Boltzmann Numerical Approach to Predict Macroscale Thermal Fluid Flow Problem. Book title: Heat Transfer - Mathematical Modelling, Numerical Methods and Information Technology. ISBN: 978-953-307-550-1 (February 2011)
S. Syahrullail, C.S.N. Azwadi, M.R. Abdul Kadir and N.E.A. Shafie. "The Effect of Tool Surface Roughness in Cold Work Extrusion". Journal of Applied Sciences, Volume 11, Issue 2, pp.367-372 (January 2011)
2020
Hassan Jabal, M., Saad Abd, H., Gaddoa, A.A., Falih Kadhim, I., Samion, S., Shajar, A.S., Hardan, A.A. (2020). Palm Olein with Jatropha Curcas Oil Blend as a Renewable Bio-Fluid. IOP Conference Series: Materials Science and Engineering, 765 (1).
2019
Aiman, Y., Syahrullail, S., Azhar, S.M., Ummikalsom, A., Mohd Kameil, A.H. (2019). Tribological effect of palm sterin and engine oil (CMEO) on pure aluminium pin steel disc with varies speed and constant load. Jurnal Teknologi, 81 (6), pp. 123-131.
Ridzuan, M.J.M., Abdul Majid, M.S., Khasri, A., Gan, E.H.D., Razlan, Z.M., Syahrullail, S. (2019). Effect of pineapple leaf (PALF), napier, and hemp fibres as filler on the scratch resistance of epoxy composites. Journal of Materials Research and Technology, 8 (6), pp. 5384-5395.
Azman, N.F., Samion, S., Moen, M.A.A., Abdul Hamid, M.K., Musa, M.N. (2019). The anti-wear and extreme pressure performance of CuO and graphite nanoparticles as an additive in palm oil. International Journal of Structural Integrity, 10 (5), pp. 714-725.
Dandan, M.A., Samion, S., Azman, N.F., Mohd Zawawi, F., Abdul Hamid, M.K., Musa, M.N. (2019). Performance of polymeric viscosity improver as bio-lubricant additives. International Journal of Structural Integrity, 10 (5), pp. 634-643.
Salleh, Z.A.M., Samion, S., Ngadi, N., Ruslan, N.N., Rahim, E.A. (2019). The tribological performance of modified RBD palm kernel oil under extreme pressure load test. Jurnal Tribologi, 22, pp. 32-39.
Rasih, R.A., Sidik, N.A.C., Samion, S. (2019). Recent progress on concentrating direct absorption solar collector using nanofluids: A review. Journal of Thermal Analysis and Calorimetry, 137 (3), pp. 903-922.
Afifah, A.N., Syahrullail, S., Wan Azlee, N.I., Che Sidik, N.A., Yahya, W.J., Abd Rahim, E. (2019). Biolubricant production from palm stearin through enzymatic transesterification method. Biochemical Engineering Journal, 148, pp. 178-184.
Opia, A.C., Abdul Hamid, M.K.B., Samion, S. (2019). Anti-oxidant property of eichhornia crassipes in oil samples. International Journal of Engineering and Advanced Technology, 8 (6), pp. 2404-2410.
Bongfa, B., Hamid, M.K.A., Samion, S., Samin, P.M., Bakar, A.R.A. (2019). Friction and wear study of passenger car piston top ring sliding on cast iron material lubricated with palm fatty acid distillate (PFAD). Jurnal Tribologi, 21, pp. 123-135.
Dandan, M.A., Samion, S., Musa, M.N., Zawawi, F.M. (2019). Evaluation of lift and drag force of outward dimple cylinder using wind tunnel. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 57 (1), pp. 48-56.
Nassir, S.A.H., Zawawi, F.M., Mazlan, M.Z., Samion, S., Yazid, M.A.W.M., Abidin, U. (2019). Numerical investigation of wake energy induced by cruising passenger vehicles on highway. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 57 (2), pp. 175-185.
Azman, N.F., Samion, S. (2019). Dispersion Stability and Lubrication Mechanism of Nanolubricants: A Review. International Journal of Precision Engineering and Manufacturing - Green Technology, 6 (2), pp. 393-414.
Hassim, M.H., Idris, M.H., Yajid, M.A.M., Samion, S. (2019). Mechanical and wear behaviour of nanostructure TiO2-Ag coating on cobalt chromium alloys by air plasma spray and high velocity oxy-fuel. Journal of Materials Research and Technology, 8 (2), pp. 2290-2299.
Dandan, M.A., Samion, S. (2019). Tribological analysis of palm kernel methyl ester containing polymeric viscosity improver. Green Materials, 7 (4), pp. 168-176.
Zulhanafi, P., Syahrullail, S. (2019). The tribological performances of Super Olein as fluid lubricant using four-ball tribotester. Tribology International, 130, pp. 85-93.
Rasih, R.A., Sidik, N.A.C., Samion, S. (2019). Numerical Investigation of Direct Absorption Solar Collector using Nanofluids: A Review. IOP Conference Series: Materials Science and Engineering, 469 (1).
Salleh, Z.A.M., Samion, S., Dandan, M.A. (2019). Custom cylinder liner-piston ring combination on pin-on-disc for lubricant characteristic study. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 61 (2), pp. 212-219.
Dandan, M.A., Yahaya, A., Syahrullail, S. (2019). The effect of the different percentage of pour point depressant (PPD) on the tribological properties of palm kernel oil. Tribology in Industry, 41 (3), pp. 365-374.
Dandan, M.A., Samion, S., Yahaya, W.M.A.W., Hadi, F. (2019). Tribological analysis of modified RBD palm kernel containing anti-oxidant additive using four-ball tribotester. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 56 (2), pp. 157-164.
Dandan, M.A., Samion, S., Musa, M.N., Zawawi, F.M. (2019). Evaluation of lift and drag force of outward dimple cylinder using wind tunnel. CFD Letters, 11 (3), pp. 145-153.
Dandan, M.A., Musa, M.N., Samion, S., Yahaya, W.M.A.W., Issham, M.A., Zawawi, F.M. (2019). Evaluation of kapok fiber and gypsum mixture to improve fire resistance. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 56 (2), pp. 276-286.
2018
Dandan, M.A., Aiman Wan Yahaya, W.M., Samion, S., Musa, M.N. (2018). A comprehensive review on palm oil and the challenges using vegetable oil as lubricant base-stock. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 52 (2), pp. 182-197.
Dandan, M.A., Yahaya, W.M.A.W., Samion, S. (2018). The effect of fluidity of palm kernel oil with pour point depressant on coefficient of friction using fourball tribotester. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 50 (2), pp. 97-107.
Musa, M.N., Samion, S., Hamid, M.K.A., Yahya, W.M.A.W., Paiman, E. (2018). Study on water hammer effect in turbulent flow through the pipe system. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 50 (2), pp. 122-133.
Hasannuddin, A.K., Yahya, W.J., Sarah, S., Ithnin, A.M., Syahrullail, S., Sidik, N.A.C., Abu Kassim, K.A., Ahmad, Y., Hirofumi, N., Ahmad, M.A., Sugeng, D.A., Zuber, M.A., Ramlan, N.A. (2018). Nano-additives incorporated water in diesel emulsion fuel: Fuel properties, performance and emission characteristics assessment. Energy Conversion and Management, 169, pp. 291-314.
Amiril, S.A.S., Rahim, E.A., Embong, Z., Syahrullail, S. (2018). Tribological investigations on the application of oil-miscible ionic liquids additives in modified Jatropha-based metalworking fluid. Tribology International, 120, pp. 520-534.
Aiman, Y., Syahrullail, S. (2018). The effect of low temperature test on lubrication performance of palm kernel oil with addition of PPD as A lubricant (ASTM D4172). Journal of Mechanical Engineering, 5 (Specialissue2), pp. 142-156.
Farhanah, A.N., Syahrullail, S. (2018). Tribological behavior of the refined, bleached, and deodorized palm kernel as an alternative lubricant. Scientia Iranica, 25 (3B), pp. 1169-1178.
Azman, N.F., Samion, S., Sot, M.N.H.M. (2018). Investigation of tribological properties of CuO/palm oil nanolubricant using pin-on-disc tribotester. Green Materials, 6 (1), pp. 30-37.
Sapawe, N., Samion, S., Razak Daud, M., Farhan Hanafi, M. (2018). Facile approaches to designing pits on acetabular cups using copper electrodes in die sinking electrical discharge machining. Materials Today: Proceedings, 5 (10), pp. 22154-22161.
Hasannuddin, A.K., Yahya, W.J., Sarah, S., Ithnin, A.M., Syahrullail, S., Sugeng, D.A., Razak, I.F.A., Abd Fatah, A.Y., Aqma, W.S., Rahman, A.H.A., Ramlan, N.A. (2018). Performance, emissions and carbon deposit characteristics of diesel engine operating on emulsion fuel. Energy, 142, pp. 496-506.
2017
Abdul Sani, A.S., Rahim, E.A., Samion, S. (2017). Tribological performance of modified jatropha oil containing oil-miscible ionic liquid for machining applications. Journal of Mechanical Science and Technology, 31 (12), pp. 5675-5685.
Amiril, S.A.S., Rahim, E.A., Syahrullail, S. (2017). A review on ionic liquids as sustainable lubricants in manufacturing and engineering: Recent research, performance, and applications. Journal of Cleaner Production, 168, pp. 1571-1589.
Rahim, E.A., Amiril, S.A.S., Mohid, Z., Syahrullail, S., Kamdani, K. (2017). Evaluation of machining performance of palm olein based tmp esters containing additives as bio-based metalworking fluids. Proceedings of the 9th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2017.
Nurul, M.A., Syahrullail, S. (2017). A new approach to cold extrusion process: Dimples indentation on sliding contact surface and palm oil as an alternative lubricant. Scientia Iranica, 24 (6), pp. 2875-2886.
Farhanah, A.N., Syahrullail, S., Ajruddin, M.A. (2017). Evaluation of RBD palm stearin as alternative lubricant for cold forward extrusion process. Journal of Physics: Conference Series, 908 (1).
Zuan, A.M.S., Syahrullail, S., Ngadi, N., Ruslan, N.N. (2017). Bio-based lubricants from modification of RBD palm kernel oil by trans-esterification. Journal of Mechanical Engineering, SI 4 (2), pp. 199-211.
Razak, D.M., Syahrullail, S., Nuraliza, N., Azli, Y., Sapawe, S. (2017). Surface modification of biomaterial embedded with pits using die sinker machine. Scientia Iranica, 24 (4), pp. 1901-1911.
Sani, A.S.A., Rahim, E.A., Talib, N., Kamdani, K., Rahim, M.Z., Samion, S. (2017). Performance evaluation of palm-olein TMP ester containing hexagonal boron nitride and an oil miscible ionic liquid as bio-based metalworking fluids. Journal of Mechanical Engineering, SI 4 (1), pp. 223-234.
Kiu, S.S.K., Yusup, S., Chok, V.S., Taufiq, A., Kamil, R.N.M., Syahrullail, S., Chin, B.L.F. (2017). Comparison on tribological properties of vegetable oil upon addition of carbon based nanoparticles. IOP Conference Series: Materials Science and Engineering, 206 (1).
Zuan, A.M.S., Syahrullail, S., Zaminain, M.D. (2017). Tribological properties of mineral oil mix with RBD palm stearin using four-ball tribotester at various loads. Advanced Science Letters, 23 (5), pp. 4725-4727.
Sapawe, N., Samion, S., Ibrahim, M.I., Daud, M.R., Yahya, A., Hanafi, M.F. (2017). Tribological Testing of Hemispherical Titanium Pin Lubricated by Novel Palm Oil: Evaluating Anti-Wear and Anti-Friction Properties. Chinese Journal of Mechanical Engineering (English Edition), 30 (3), pp. 644-651.
Nurul, M.A., Syahrullail, S. (2017). Surface Texturing and Alternative Lubricant: Tribological Study of Tapered Die Sliding Contact Surface in Cold Extrusion Process. Tribology Transactions, 60 (1), pp. 176-186.
Azman, N.F., Samion, S. (2017). Improvement of the lubrication performance of RBD palm stearin as an alternative lubricant under different sliding speeds. Journal of Mechanical Engineering, 63 (1), pp. 15-24.
Zulhanafi, P., Syahrullail, S., Faridzuan, M.M. (2017). Tribological performance of palm kernel oil added with nanoparticle copper oxide using fourball tribotester. Jurnal Teknologi, 79 (7-4), pp. 53-59.
Aiman, Y., Syahrullail, S., Yahya, W.J. (2017). Tribological performance of palm kernel oil with addition of pour point depressants as a lubricant using four-ball tribotester under variable load test. Jurnal Teknologi, 79 (7-3), pp. 43-52.
Sidik, N.A.C., Yazid, M.N.A.W.M., Samion, S. (2017). A review on the use of carbon nanotubes nanofluid for energy harvesting system. International Journal of Heat and Mass Transfer, 111, pp. 782-794.
Afifah, A.N., Syahrullail, S., Amirrul Amin, M., Faizal, H.M. (2017). Mechanical properties of palm kernel oil-copper oxide nanolubricant. Jurnal Teknologi, 79 (7-4), pp. 61-66.
Zuan, A.M.S., Syahrullail, S., Arif, M.D., Kamitani, S. (2017). Tribological performance of palm kernel oil at various load using pin-on-disk tribotester. Journal of Mechanical Engineering, (Special Issue 1), pp. 91-102.
Azman, N.F., Samion, S., Rahim, E.A., Shunpei, K. (2017). The influence of Zinc-Dialkyl-Dithiophosphate (ZDDP) additives on the tribological performance of RBD palm kernel. Journal of Mechanical Engineering, (Special Issue 1), pp. 65-77.
Sidik, N.A.C., Samion, S., Ghaderian, J., Yazid, M.N.A.W.M. (2017). Recent progress on the application of nanofluids in minimum quantity lubrication machining: A review. International Journal of Heat and Mass Transfer, 108, pp. 79-89.
Zuan, A.M.S., Syahrullail, S., Yahya, W.J., Shafiq, M.N., Fawwaz, Y.M. (2017). Tribological properties of potential bio-based lubricants from rbd palm stearin and palm fatty acid distillate. Jurnal Teknologi, 79 (7-3), pp. 21-26.
Rahim, E.A., Talib, N., Amiril Sahab, A.S., Syahrullail, S., Mohid, Z. (2017). Tribological evaluation on various formulation of modified rbd palm olein as sustainable metalworking fluids for machining process. Materials Science Forum, 882, pp. 13-17.
Kiu, S.S.K., Yusup, S., Soon, C.V., Arpin, T., Samion, S., Kamil, R.N.M. (2017). Tribological investigation of graphene as lubricant additive in vegetable oil. Journal of Physical Science, 28, pp. 257-267.
Ghaderian, J., Sidik, N.A.C., Kasaeian, A., Ghaderian, S., Okhovat, A., Pakzadeh, A., Samion, S., Yahya, W.J. (2017). Performance of copper oxide/distilled water nanofluid in evacuated tube solar collector (ETSC) water heater with internal coil under thermosyphon system circulations. Applied Thermal Engineering, 121, pp. 520-536.
2016
Nurul, M. A., Syahrullail, S. & Teng, H. W., 2016. Alternative lubricants: Study on palm oil-based lubricants in metal forming process, 2016. Journal of Oil Palm Research, 28, 1, pp. 93-103. (IF=0.544, Q4)
Razak, D. M., Samion, S., Noorawzi, N. & Azli, Y., 2016. A New Tribological Approach for Lubricated Sliding Contact of Pitted Metallic Curvature Cup. Tribology Transactions, 59, 5, pp. 876-882. (IF=1.418, Q2)
Faizal, H. M., Nazri, M. S. M., Rahman, M. M., Syahrullail, S., 2016. Development of palm biomass briquettes with polyethylene plastic waste addition. Jurnal Teknologi, 78, 9-2, pp. 69-75. (SCOPUS)
Sapawe, N., Samion, S., Zulhanafi, P., Nor Azwadi, C. S. & Hanafi, M. F., 2016. Effect of Addition of Tertiary-Butyl Hydroquinone into Palm Oil to Reduce Wear and Friction Using Four-Ball Tribotester. Tribology Transactions, 59, 5, pp. 883-888. (IF=1.418, Q2)
Azman, N. F., Samion, S. and Rahim, E. A., 2016. Formulation of refined, bleached and deodorised palm stearin with zinc dialkyl-dithiophosphate additive and its tribological performance. Jurnal Teknologi, 78, 9-2, pp. 53-59. (SCOPUS)
Nurul, M. A. & Syahrullail, S., 2016. Influence of micro-pits indentation and palm based-oil on taper die sliding contact surface in cold extrusion process. International Journal of Precision Engineering and Manufacturing, 17, 7, pp. 917-930. (IF=1.075, Q3)
Nuraliza, N., Syahrullail, S., Razak, D. M. and Azwadi, C. S. N., 2016. Influence of micro-pits on sliding motion under low speeds for block-on-disk tribotester. Particulate Science and Technology, 34, 6, pp. 754-763. (IF=0.707, Q3).
Izhan, I. M., Syahrullail, S., Yong, S. Y. and Nurul, M. A., 2016. Investigation of micro-pits formation on billet surfaces in plane strain extrusion. Jurnal Teknologi, 78, 10-2, pp. 39-45.
Sidik, N. A. C., Yazid, M. N. A. W. M., Samion, S., Musa, M. N. and Mamat, R., 2016. Latest development on computational approaches for nanofluid flow modeling: Navier-Stokes based multiphase models. International Communications in Heat and Mass Transfer, 74, pp. 114-124. (IF=2.559, Q1).
Afifah, A.N., Syahrullail, S., Sidik, N.A.C., 2016. Magnetoviscous effect and thermomagnetic convection of magnetic fluid: A review. Renewable & Sustainable Energy Reviews, 55, pp.1030-1040. (IF = 6.798, Q1).
Bongfa, B., Syahrullail, S., Abdul Hamid, M. K. and Samin, P. M., 2016. Suitable additives for vegetable oil-based automotive shock absorber fluids: an overview. Lubrication Science, 28, 6, pp. 381-404. (IF=1.384, Q2).
Nurul, M. A. & Syahrullail, S., 2016. Surface Texturing and Alternative Lubricant: Tribological Study of Tapered Die Sliding Contact Surface in Cold Extrusion Process. Tribology Transactions, 60, 1, 176-186. (IF = 1.418, Q2).
Zuan, A. M. S., Yong, S. Y., Nurul, M. A., Syahrullail, S. & Rahim, E. A., 2016. The effects of the die half angle of taper die on plane strain extrusion. Jurnal Teknologi, 78, 9-2, pp. 45-51. (SCOPUS)
Sidik, N. A. C., Samion, S., Musa, M. N., Muhammad, M. J., Muhammad, A. I., Yazid, M. N. A. W. M. and Mamat, R., 2016. The significant effect of turbulence characteristics on heat transfer enhancement using nanofluids: A comprehensive review. International Communications in Heat and Mass Transfer, 72, pp. 39-47. (IF=2.559, Q1).
Hassan, M., Syahrullail, S. & Ani, F. N., 2016. The tribological characteristics of the cactus and mineral oil blends using four-ball tribotester. Jurnal Teknologi, 78, 9-2, pp. 33-38. (SCOPUS)
Faizal, H. M., Jusoh, M. A. M., Rahman, M. R. A., Syahrullail, S. and Latiff, Z. A., 2016. Torrefaction of palm biomass briquettes at different temperature. Jurnal Teknologi, 78, 9-2, pp. 61-67. (SCOPUS)
Nuraliza, N. and Samion, S. 2016. Tribological Effects of Vegetable Oil as Alternative Lubricant: A Pin-on-Disk Tribometer and Wear Study. Tribology Transactions, 59, 5, pp. 831-837. (IF = 1.418, Q2).
Hassan, M., Ani, F. N. and Syahrullail, S., 2016. Tribological Features of Refined, Deodorized, and Bleached Palm Olein with Mineral Oil Blend. Tribology Transaction, 59, 4, pp. 671-678. (IF=1.418, Q2).
Hassan, M., Ani, F. N. & Syahrullail, S., 2016. Tribological performance of refined, bleached and deodorised palm olein blends bio-lubricants. Journal of Oil Palm Research, 28, 4, pp. 510-519. (IF = 0.544, Q4).
2015
Nuraliza, N., Syahrullail, S., Razak, D.M., 2015. An alternative lubricant: The potential of double fractionated palm olein as a lubricant for enhanced tribological behaviour using a pin-on-disk tribo-tester. Journal of Oil Palm Research, 27, 4, pp.393-402.
Farhanah, A.N., Syahrullail, S., 2015. Tribological performance of raw and formulated RBD palm Kernel with ZDDP additive. Tribology - Materials, Surfaces and Interfaces, 9, 4, pp.191-195.
Nuraliza, N., Syahrullail, S., Musa, M.N., 2015. Evaluation on the tribological properties of double fractionated palm olein at different loads using pin-on-disc machine. Jurnal Teknologi, 75, 11, pp.113-122.
Razak, D.M., Syahrullail, S., Sapawe, N., Azli, Y., Nuraliza, N., 2015. A new approach using palm olein, palm kernel oil, and palm fatty acid distillate as alternative biolubricants: Improving tribology in metal-on-metal contact. Tribology Transactions, 58, 3, pp.511-517.
Farhanah, A.N., Syahrullail, S., Musa, M.N., Bahak, M.Z., 2015. Modification of RBD palm kernel and RBD palm stearin oil with ZDDP additive addition. Jurnal Teknologi, 74, 10, pp.121-126.
Nurul, M.A., Syahrullail, S., Musa, M.N., 2015. Determining alternatives for metal forming lubricants: A study using plane strain cold extrusion process of JIS-A1100 pure aluminum billet. Jurnal Teknologi, 74, 10, pp.35-43.
Afifah, A.N., Syahrullail, S., Nor Azwadi, C.S., 2015. Natural convection of aluminium oxidewater nanofluid. Jurnal Teknologi, 75, 11, pp.161-167.
2014
Kartiko, N., Azli, Y., Nor Liyana, H.S., Syahrullail, S., Razak Daud, M.D., 2014. Development of computer-aided EDM for machining micropits on spherical surface of hip implant. Applied Mechanics and Materials, 554, pp. 541-545.
Syahrullail, S., Zulhanafi, P., 2014. The oxidation effect of palm oil based lubricant using four - Ball tribotester. Applied Mechanics and Materials, 554, pp. 281-285.
Jabal, M.H., Ani, F.N., Syahrullail, S., 2014. The tribological characteristic of the blends of rbd palm olein with mineral oil using four-ball tribotester. Jurnal Teknologi (Sciences and Engineering) 69 (6), pp. 11-14.
Golshokouh, I., Ani, F.N., Syahrullail, S., 2014. Lubricity of palm fatty acid distillates at various rotational speeds. Applied Mechanics and Materials, 606, pp. 9-13.
Golshokouh, I., Syahrullail, S., Ani, F.N., 2014. Influence of normal load and temperature on tribological properties of jatropha oil. Jurnal Teknologi, 71 (2), pp. 145-150.
Syahrullail, S., Razak, D.M., Sapawe, N., Azli, Y., Kartiko, N., 2014. Effect of low current for machining pit using electrical discharge machine. Applied Mechanics and Materials, 554, pp. 180-184.
Syahrullail, S., Azmi, A.M., Sapawe, N., Khalid, A., 2014. Wear characterization of aluminum lubricated with palm olein at different normal load. Applied Mechanics and Materials, 554, pp. 401-405.
Sidik, N.A.C., Mohammed, H.A., Alawi, O.A., Samion, S., 2014. A review on preparation methods and challenges of nanofluids. International Communications in Heat and Mass Transfer, 54, pp. 115-125.
Syahrullail, S., Nurul, M.A., 2014. Evaluation of paraffinic mineral oil as lubricant in cold work extrusion process. Applied Mechanics and Materials, 554, pp. 327-331.
Syahrullail, S., Norhakem, H.M., Sapawe, N., Khalid, A., 2014. The influence of normal load in wear resistance characteristic of palm fatty acid distillate. Applied Mechanics and Materials, 554, pp. 286-290.
Syahrullail, S., Kamitani, S., Nakanishi, K., 2014. The effect of lubricant viscosity in cold work forward extrusion. Applied Mechanics and Materials, 554, pp. 291-295.
Syahrullail, S., Izhan, M.I., Mohammed Rafiq, A.K., 2014. Tribological investigation of RBD palm olein in different sliding speeds using pin-on-disk tribotester. Scientia Iranica, 21 (1), pp. 162-170.
Syahrullail, S., Nuraliza, N., 2014. Friction and wear performance of double fractionate palm olein lubricant using pin-on-disk tribometer. Applied Mechanics and Materials, 554, pp. 396-400.
Nurul, M.A., Syahrullail, S., 2014. Study of alternative lubricants for cold extrusion process of A1100 pure aluminium. Jurnal Teknologi, 71 (2), pp. 139-143.
Alawi, O.A., Sidik, N.A.C., Mohammed, H.A., Syahrullail, S., 2014. Fluid flow and heat transfer characteristics of nanofluids in heat pipes: A review. International Communications in Heat and Mass Transfer, 56, pp. 50-62.
Iman, G., Syahrullail, S., Farid Nasir, A., 2014. Empty fruit bunches oil as new lubricant. Applied Mechanics and Materials, 660, pp. 352-356. Samion, S., Daud, M.R., Yahya, A., (...), Hashim, N.L.S., Nugroho, K., 2014. Machining pits on the curvature surface cup using spark process. Jurnal Teknologi (Sciences and Engineering), 69 (3), pp. 129-132.
Andromeda, T., Yahya, A., Mahmud, N., (...), Samion, S., Baharom, A., 2014. Architecture and training algorithm of feed forward artificial neural network to predict material removal rate of electrical discharge machining process. Scientia Iranica, 21 (6), pp. 2224-2231.
Erawan, M.A., Azli, Y., Nor Hisham, K., (...), Zurkarmawan, A.B., Trias, A., 2014. Power generator of Electrical Discharge Machining (EDM) system. Applied Mechanics and Materials, 554, pp. 638-642.
Golshokouh, I., Syahrullail, S., Ani, F.N., Masjuki, H.H., 2014. Investigation of palm fatty acid distillate oil as an alternative to petrochemical-based lubricants. Journal of Oil Palm Research, 26 (MAR), pp. 25-36.
Syahrullail, S., Nuraliza, N., 2014. Experimental study on the effect of different speed using pin on disc tribotester. Applied Mechanics and Materials, 465-466, pp. 562-565.
Golshokouh, I., Syahrullail, S., Shariatmadari, S., Ani, F.N., 2014. Investigate Jatropha oil as new source of lubricant oil. Applied Mechanics and Materials, 465-466, pp. 201-205.
Syahrullail, S., Kamitani, S., Shakirin, A., 2014. Tribological evaluation of mineral oil and vegetable oil as a lubricant. Jurnal Teknologi (Sciences and Engineering), 66 (3), pp. 37-44.
Hafis, S.M., Ridzuan, M.J.M., Mohamed, A.R., Farahana, R.N., Syahrullail, S., 2014. An experimental investigation of palm pressed fibre waste as lubricant in strip drawing. Source of the DocumentJurnal Teknologi (Sciences and Engineering), 66 (3), pp. 91-98.
2013
Md Razak, D., Syahrullail, S., Azli, Y., Nazriah, M., Nor Liyana, S.H. and Kartiko, N., 2013. Micro-pits on biomaterial in electrical discharge machining by using Taguchi method. The 13th International Conference on Robotics, Control and Manufacturing Technology (ROCOM '13), pp.172-177.
Syahrullail, S., Ani, F.N. and Golshokouh, I., 2013. Wear resistance characteristic of vegetable oil. The 2nd International Conference on Sustainable Materials Engineering (ICoSM 2013), pp.44-47.
Syahrullail, S., Wira, J.Y., Wan Nik, W.B. and Tiong, C.I., 2013. The effect of sliding speed on friction and wear of RBD palm olein. Applied Mechanics and Materials, 315, pp.951-955.
Izhan, M.I., Wira, J.Y., Abdul Kadir, M.R. and Syahrullail, S., 2013. Experimental study on the effect of different speeds applied with palm olein using pin-on-disk tester. Applied Mechanics and Materials, 315, pp.946-950.
Golshokouh, I., Wira, J.Y., Farid, N.A. and Syahrullail, S., 2013. Palm fatty acid distillate as an alternative source for hydraulic oil. Applied Mechanics and Materials, 315, pp.941-945.
Syahrullail, S., Wira, J.Y., Wan Nik, W.B. and Fawwaz, W.N., 2013. Friction characteristic of RBD palm olein using four-ball tribotester. Applied Mechanics and Materials, 315, pp.936-940.
Golshokouh, I., Syahrullail, S., Ani, F.N. and Masjuki, H.H., 2013. Investigation of palm fatty acid distillate as an alternative lubricant of petrochemical based lubricant, tested at various speeds. International Review of Mechanical Engineering (IREME), 7-1, pp.72-80.
Nor Liyana, S.H., Azli, Y., Mohammed Rafiq, A.K., Syahrullail, S. and Nazriah, M., 2013. Simulation of micro-EDM servomotor for machining micro pits oh hip implant. Jurnal Teknologi, 60, pp.45-51.
Syahrullail, S., Azwadi, C.S.N.and Najib, Y.M., 2013. The influences of the die half angle of taper die during cold extrusion process. Arabian Journal for Science and Engineering, 38, pp.1201-1207.
Izhan, M.I., Mohammed Rafiq, A.K. and Syahrullail, S., 2013. Friction resistance of refined, bleached and deodorized (RBD) palm olein using modified pin-on-disk tribotester. Jurnal Teknologi, 60, pp.27-33.
Trias, A., Azli, Y., Syahrullail, S., Ameruddin, B. and Nor Liyana, H., 2013. PID controller tunning by differential evolution algorithm on EDM servo control system. Applied Mechanics and Materials, 284-287, pp.2266-2270.
Hafis, S.M., Ridzuan, M.J.M., Farahana, R.N., Amran Ayob and Syahrullail, S., 2013. Paraffinic mineral oil lubrication for cold forward extrusion: Effect of lubricant quantity and friction. Tribology International, 60, pp.111-115.
2012
Chiong Ing, T., Rafiq, A.K.M., Azli, Y. and Syahrullail, S., 2012. Tribologcal behaviour of refined, bleached and deodorized palm olein in different loads using a four-ball tribotester. Scientia Iranica, 19(6), pp.1487-1492.
Kamitani, S., Nakanishi, K., Matsushita, T. and Syahrullail, S., 2012. Measurement of coefficient of friction under bulk plastic deformation by using plane strain extrusion apparatus with plane plate tool and taper die. Tribology Online, 7(4), pp.249-257.
Syahrullail, S. and Chiong Ing, T., 2012. Friction characteristic of palm olein at different operating temperature using four-ball tribotester. The 5th International Meeting on Advances in Thermofluids - IMAT 2012, Bintan, Indonesia (12-13 Nov 2012).
Norhayati, A., Maizan, S., Zin, H.M., Wira, J.Y., Wan Nik, W.B. and Syahrullail, S., 2012. The influence of lubricant in cold work forward extrusion using micro-pits tool. Jurnal Teknologi, 58, pp.89-93.
Wan Nik, W.B., Syahrullail, S., Roslina, R., Rahman, M.M. and Zulkifli, M.F.R., 2012. Corrosion behaviour of aluminium alloy in palm oil methyl ester (B100). Jurnal Teknologi, 58, pp.73-76.
Tiong, C.I., Azli, Yahya., Mohammed Rafiq, A.K., Syahrullail, S., 2012. Tribological evaluation of refined, bleached and deodorized palm stearin using four-ball tribotester with different normal loads. Journal of Zhejiang University - Science A, 13(8), pp.633-640.
Nor Liyana, S.H., Azli, Y., Trias, A., Mohammed Rafiq, A.K., Nazriah, M. and Syahrullail, S., 2012. Simulation of PSO-PI Controller of DC Motor in Micro-EDM System for Biomedical Application. Procedia Engineering, 41, pp.805-811. (Presented in International Symposium on Robotics and Intelligent Sensors - IRIS 2012).
Tiong, C.I., Mohammed Rafiq, A.K., Azli, Y. and Syahrullail, S., 2012. The Effect of Temperature on the Tribological Behavior of RBD Palm Stearin. Tribology Transactions, 55(5) pp.539-548.
Wira, J.Y., Tan, W.C., Syahrullail, S., Noge, H., Mazlan, S. and Alias, M.Nor., 2012. Utilization of Waste Hydraulic Oil as Fuel in Diesel Engine. Advanced Materials Research, Volumes 518-523, pp.3263-3266.
Syahrullail, S., Kamitani, S. and Nakanishi, K., 2012. Experimental Evaluation of Refined, Bleached, and Deodorized Palm Olein and Palm Stearin in Cold Extrusion of Aluminum A1050. Tribology Transactions, Volume 55, Issue 2, pp.199-209.
Wan Nik, W.B., Ayob, A.F., Syahrullail, S., Masjuki, H.H. and Ahmad, M.F., 2012. The Effect of Boron Friction Modifier on the Performance of Brake Pads. International Journal of Mechanical and Materials Engineering, Volume 7, No. 1, pp.31-35.
Nor Liyana, S.H., Azli, Y., Mohammed Rafiq, A.K., Syahrullail, S. and Nazriah, M., 2012. Manufacturing Methods for Machining Micro Pits of Hip Implant for Metal-on-Metal Lubrication. International Conference on Biomedical Engineering (ICoBE), Penang, Malaysia.
Nazriah, M., Azli, Y., Mohammed Rafiq, A.K., Syahrullail, S. and Nor Liyana, S.H., 2012. Electrical Discharge Machining Pulse Power Generator to Machine Micropits of Hip Implant. International Conference on Biomedical Engineering (ICoBE), Penang, Malaysia.
2011
Wan Nik, W.B, Zulkifli, F., Ahmad, A., Sulaiman, O., Syahrullail, S. "Hydraulic field test rig and evaluating plant oil performance", International Journal of Mechanical and Mechanics Engineering, Volume 11, Issue 5, pp.19-25 (October 2011).
Tiong Chiong Ing, A.K.Mohammed Rafiq and S.Syahrullail. "Friction Characteristic of Jatropha Oil using Fourball Tribotester", Regional Tribology Conference - RTC2011, Langkawi, Kedah, Malaysia (22-24 Nov 2011)
S.Syahrullail, J.Y.Wira, A.H.M.Kameil and W.N.Fawwaz. "Fourball Tribotester Assessment of RBD Palm Olein as an Industrial Lubricant", International Tribology Conference - ITC2011, Hiroshima, Japan (30 Oct - 3 Nov 2011)
Iman golshokouh, Farid Nasir Ani and S.Syahrullail. "Wear Resistance Evaluation of Palm Fatty Acid Distillate Using Four-ball Tribotester", The 4th International Meeting of Advances in Thermofluids - IMAT2011, Melaka, Malaysia, pp.1302-1309 (3-4 Oct 2011)
S.Syahrullail, J.Y.Wira, A.H.M.Kameil and W.N.Fawwaz. "Wear Characteristic of RBD Palm Olein using Four-ball Tribotester", The 4th International Meeting of Advances in Thermofluids - IMAT2011, Melaka, Malaysia, pp.1296-1301 (3-4 Oct 2011)
A.K. Khairuldean, T. Chiong Ing, Mohd Salman Che Kob, Aries Budianto, S. Bambang, T. Kamarul Baharin, S. Ariyono and S.Syahrullail. "Extreme Pressure Properties Investigation of Palm Olein Using Four Ball Tribotester", The 4th International Meeting of Advances in Thermofluids - IMAT2011, Melaka, Malaysia, pp.568-575 (3-4 Oct 2011)
Tiong Chiong Ing, A.K. Mohammed Rafiq, J.Y. Wira and S.Syahrullail. "Experimental Study the Effect of Speeds in Wear Using Fourball Tribotester", The 4th International Meeting of Advances in Thermofluids - IMAT2011, Melaka, Malaysia, pp.552-558 (3-4 Oct 2011)
A.K. Khairuldean, T. Chiong Ing, S. Bambang, T. Kamarul Baharin, J.Y. Wira and S.Syahrullail. "Evaluation of Oleic Acid as Additive in ATF Fluid", The 4th International Meeting of Advances in Thermofluids - IMAT2011, Melaka, Malaysia, pp.505-510 (3-4 Oct 2011)
M. K. Abdul Hamid , G.W. Stachowiak and S. Syahrullail. "Effects of Hard Particles on Friction Coefficients and Particle Embedment in Brake System during Hard Braking", The 4th International Meeting of Advances in Thermofluids - IMAT2011, Melaka, Malaysia, pp.473-481 (3-4 Oct 2011)
S.M.Hafis, M.J.M.Ridzuan, W.N.Imaduddin Helmi and S.Syahrullail. "Effect of Extrusion Ratio on Paraffinic Mineral Oil Lubricant in Cold Forward Extrusion", The 4th International Meeting of Advances in Thermofluids - IMAT2011, Melaka, Malaysia, pp.432-437 (3-4 Oct 2011)
M.J.M.Ridzuan , S.M.Hafis, K.N.Saifullah and S.Syahrullail. "A study of minimum quantity lubricant (MQL) of RBD palm stearin in plane strain extrusion", The 4th International Meeting of Advances in Thermofluids - IMAT2011, Melaka, Malaysia, pp.79-83 (3-4 Oct 2011)
A. Norhayati, J.Y. Wira, H.M. Zin and S.Syahrullail. "A New Method to Maintain Lubricant Layer in Extrusion Process", The 4th International Meeting of Advances in Thermofluids - IMAT2011, Melaka, Malaysia, pp.57-63 (3-4 Oct 2011)
S.M.Hafis, M.J.M.Ridzuan, S.Syahrullail and A.Amran. "The Effect of Paraffinic Mineral Oil Lubrication in Cold Forward Extrusion", International Journal of Integrated Engineering - Issue on Mechanical, Materials and Production Engineering, Volume 3, No.1, pp.28-31 (2011)
Tiong Chiong Ing, Mohammed Rafiq Abdul Kadir, Nor Azwadi Che Sidik and S.Syahrullail. Chapter in book. Chapter 6: Experimental Evaluation on Lubricity of RBD Palm Olein using Fourball Tribotester. Book title: Tribology - Lubricants and Lubrication ISBN: 978-953-307-371-2
S.Syahrullail, B.M.Zubil, C.S.N.Azwadi and M.J.M.Ridzuan. "Experimental Evaluation of Palm Oil as Lubricant in Cold Forward Extrusion". International Journal of Mechanical Sciences, 53, pp.549-555 (July 2011)
Khairuldean A.Kadir, T.Chiong Ing, Bambang Supriyo, Kamarul Bahrin Tawi and S.Syahrullail. "Comparison Between Mineral Oil and Palm Olein in Wear Resistance". ASEAN Conference on Scientific and Social Science Research - ACSSSR, Pulau Pinang, Malaysia (22-23 June 2011)
S.Syahrullail and A.Horhayati. "The Effect of the Diamond Shape Pits on Taper Die in Extrusion Process". ASEAN Conference on Scientific and Social Science Research - ACSSSR, Pulau Pinang, Malaysia (22-23 June 2011)
S.M.Hafis, S.Syahrullail, A.Amran and M.J.M.Ridzuan. "The Effect of Paraffinic Mineral Oil Lubrication in Cold Forward Extrusion". 2nd International Conference on Mechanical & Manufacturing Engineering 2011 - ICME, Putrajaya, Malaysia (6-7 June 2011)
M.J.M.Ridzuan, S.Syahrullail, S.M.Hafis and A.R.Anas. "Experimental Performance Evaluation of RBD Palm Stearin as an Extrusion Lubricant". 2nd International Conference on Mechanical & Manufacturing Engineering 2011 - ICME, Putrajaya, Malaysia (6-7 June 2011)
S.Syahrullail, C.S.N.Azwadi and C.I.Tiong. "The Metal Flow Evaluation of Billet Extruded with RBD Palm Stearin". International Review of Mechanical Engineering (IREME), Volume 5, No.1, pp.21-27 (January 2011)
C.S.N.Azwadi and S.Syahrullail. Chapter in book. Chapter 6: Lattice Boltzmann Numerical Approach to Predict Macroscale Thermal Fluid Flow Problem. Book title: Heat Transfer - Mathematical Modelling, Numerical Methods and Information Technology. ISBN: 978-953-307-550-1 (February 2011)
S. Syahrullail, C.S.N. Azwadi, M.R. Abdul Kadir and N.E.A. Shafie. "The Effect of Tool Surface Roughness in Cold Work Extrusion". Journal of Applied Sciences, Volume 11, Issue 2, pp.367-372 (January 2011)